MITAN GRAPHITE GF GRIG. ARDES 0.75
€19.52 The original price was: €19.52.€15.99The current price is: €15.99. (Incl. VAT)
100% secure shopping
Payments
protected
Insured shipping
Transportation
guaranteed
MITAN GRAPHITE ANTI-CORROSIVE ENAMEL FINE GRAIN 7710 SLATE GREY L.0.750
| Weight | 4 kg |
|---|---|
| Measure unit | PZ |
1 available
MITAN GRAPHITE FINE GRAIN ENAMEL SLATE GREY 7710
Card Code 0130
Revision 03 of 02/08/2019
Name GRAPHITE
Features: Anticorrosive ferromicaceous enamel. Solvent-based.
Classification (UNI 8681) B4.AOB2.A.AB
Single-component, drying, solution-based finishing coat paint
oxidative chemical, opaque, with barrier effect pigmentation, alkyd.
VOC Classification High performance one-component paints.
(Directive 2004/42/EC) EU VOC limit value for GRAPHITE (Cat. A/i): 500 g/l (2010)
GRAPHITE contains a maximum of 500 g/l VOCs
NEW IRON application cycle
Clean the surface thoroughly, removing any traces of dust, dirt or elements in progress.
detach and degrease with washing thinner.
Apply two coats of GRAPHITE.
ALREADY PAINTED IRON
Clean the surface thoroughly, removing any traces of dust, dirt or elements in progress.
detachment: fill, sand to level the surface and degrease with washing thinner.
Apply two coats of GRAPHITE.
Practical advice ENVIRONMENTAL AND SUPPORT CONDITIONS
Ambient and substrate temperature: min. +5°C / max. +30°C
Relative humidity of the environment: < 60%
Substrate humidity: < 10 RH
Safety Precautions Reclose the container immediately after use.
Keep the jar tightly closed, protected from frost, away from heat sources and direct sunlight.
The information for the user is contained in the relevant safety data sheet.
Empty containers or containers with slight traces of dried product residues must be
disposed of in accordance with local regulations.
GRAPHITE
Card Code 0130
Revision 03 of 02/08/2019
Technical information Method Data at 20°C and 60% Relative Humidity
Appearance and finish Matte
Density, g/ml UNI 8910 1,250 ÷ 1,400
Viscosity ISO Ǿ 8, s UNI 8356 34 ÷ 42
Recommended dry thickness ASTM D 1186 70 ÷ 120
microns per hand
Solid content, % by weight UNI 8906 65 ÷ 80
Overpaintable, 18pm – 24am
Exterior / Interior YES / YES
Colors Chart Tints
Alkyd Binder
Cleaning Tools with Turpentine
Turpentine Thinner
Roller application, % by weight Ready to use
Brush application, % by weight Ready to use
Spray and airless application, % by weight 10% White spirit
Contrast ratio MU 1631 99 – Good
Theoretical coverage per coat, m2/lt ISO 7254 10-12 m2/lt
Gloss UNI 9389 2 – 4 – Very matt
Dirt pick-up, L UNI 10792 3,3 – Low
The values expressed are the average of the tests.
What is indicated regarding the methods of use and the results obtainable with our product corresponds to our
concrete experiences, without however constituting our commitment or responsibility, therefore the sale of the product is not covered by guarantees with regards to
the application and is carried out with the understanding that the user will determine its suitability for his specific applications after carrying out tests
preliminaries.
