VIVILEGNO COLOURLESS WATER LT 0.75

VIVILEGNO

Data Sheet Code 0132 Rev. 04 of 22.02.2017

Name VIVILEGNO

Features Water-based wood protector. Matt finish. Classification (UNI 8681) A1.COA2.FA Single-component, physically drying, matt, acrylic, water-based, saturation-based surface impregnation paint. VOC classification Paints and wood preservatives for interior/exterior finishes, including matt impregnators. (Directive 2004/42/EC) EU VOC limit value for VIVILEGNO (Cat. A/e): 130 g/l (2010). VIVILEGNO contains a maximum of 130 g/l of VOCs.

Application cycle

NEW WOOD: Surface must be completely dry and seasoned. Thoroughly clean the surface, removing all traces of dust, dirt, or loose particles. Apply a first coat of product to deeply impregnate the wood. After 24 hours, lightly sand to remove the wood grain with medium-grit sandpaper and apply a finishing coat of VIVILEGNO.

PREVIOUSLY PAINTED WOOD: Wash with water and detergent, rinse, and let dry. Clean the surface thoroughly, removing any dust, dirt, or loose particles. Apply a first coat of product to thoroughly impregnate the wood. After 24 hours, lightly sand to remove the wood grain with medium-grit sandpaper and apply a finishing coat of VIVILEGNO.

Practical advice

ENVIRONMENTAL AND SUPPORT CONDITIONS

Ambient temperature: min. +5°C / max. +30°C. Substrate temperature: min. +5°C / max. +30°C. Ambient relative humidity: <60%. Substrate humidity: <10% RH. Safety precautions: Keep the container tightly closed and away from frost. No labelling required (Legislative Decree No. 52 of 03-02-97 and subsequent amendments and additions). User information is contained in the relevant safety data sheet. Empty containers or those with slight traces of dried product residues must be disposed of according to local regulations.VIVILEGNO Data Sheet Code 0132 Rev. 04 of 22.02.2017 Page 2 of 2 Technical information Method Data at 20°C and 60% Relative Humidity Appearance and finish Matt Density, g/ml UNI 8910 0,900 ÷ 1,000 Brookfield viscosity, cps ASTM D 2196 1900 ÷ 2100 Recommended dry film thickness ASTM D 1186 ND microns per coat Solids content, % by weight UNI 8906 15 ÷ 20 Overpaintable, hours 4 – 6 Exterior / Interior YES/YES Colours Colour chart Binder Acrylic Tool cleaning Water Thinner Water Roller application, % by weight – Transparent / Coloured Ready to use / Ready to use Brush application, % by weight – Transparent / Colored Ready to use / Ready to use Spray and airless application, % by weight – Transparent / Colored Ready to use / Ready to use Contrast ratio MU 1631 ND Theoretical coverage per coat, m2/lt ISO 7254 14-15 m2/lt per coat Wet abrasion resistance EN 13300 ND ISO 11998 Water vapour diffusion WDD UNI 9396 ND (film thickness, 250 dry microns) Gloss UNI 9389 ND Dirt pick-up, ∆L UNI 10792 ND The values ​​expressed are averages of tests. The information provided regarding the methods of use and the results obtainable with our product corresponds to our concrete experiences, but does not constitute our commitment or responsibility. Therefore, the sale of the product is not covered by guarantees regarding the application and is made with the understanding that the user will determine its suitability for his specific applications after having carried out preliminary tests.