Biotek Breathable

Breathable sanitizing water-based paint

Water-based interior paint with anti-mold and antibacterial properties. It is highly breathable and highly resistant to fungi and mold. It is particularly suitable for treating high-humidity environments such as kitchens, bathrooms, and ceilings in general.

Dilution: Water 15 – 20% vol.
Application: Brush, roller, spray
Yield: 4 – 5 m² / l in two coats
Available colors: White and color chart

Biotek Breathable
Breathable sanitizing water-based paint
1.
Product name
Biotek Breathable
:
Sanitizing water-based paint for interiors with excellent breathability.
2.
Features
It is an interior water-based paint with anti-mold and antibacterial action. It has a high
breathability and high resistance to the action of fungi and mold. It is used to treat
environments where there is high humidity,
such as kitchens and bathrooms and for ceilings in
It also protects surfaces from the invasive action of microorganisms.
3.
Colors and compatibility
Biotek Traspirante is available in white and can be colored with any color system.
4.
Application
Preparation of the supports
New surfaces to be treated or any patches with repair mortars must be
seasoned, perfectly clean, cohesive and dry. Apply a coat of
anchoring immunizing action
Biotek K-21
diluted 1:1 with water.
Product application
Biotek Traspirante must be applied in two consecutive coats (brush or roller) with an interval
approximately 5 hours between coats depending on temperature and relative humidity
of the air. Dilute the product with water to ensure suitable workability, 30
% by weight for the first coat and 20% by weight for the second coat.
Indicative consumption
Consumption is always influenced by the structure of the supports.
On average: 4-5 m
2
/l (on both hands)
​

Application limits
Il
The product should not be applied with high humidity and temperatures below +7
°C and above +30 °C.
Cleaning the tools
Wash all used tools under running water immediately after use.
5.
Packaging and storage
The product is supplied in 14 litre and 5 litre polyethylene containers specifically
labelled. It should be stored in cool environments and protected from the sun and frost in
original packages tightly closed.
6.
Technical data
pH
7,5 - 8,0
Specific weight
1,61 Kg/l approx.
Vapor diffusion resistance factor (UNI EN ISO 7783)
μ
=
100
Resistance to washing (UNI EN ISO 11998)
Class 3
COV
(Directive 2004/42/EC – Legislative Decree 161/2006)
1,5 g / l
Technical advice relating to use provided verbally or in writing as assistance to the customer or applicator based on our
experiences, corresponding to the current state of scientific and practical knowledge, are not binding and do not demonstrate any
contractual legal relationship nor ancillary obligation with the sales contract. They do not exempt the buyer from his own
responsibility to personally test the products with regard to their suitability for the intended use. The contents of the
This form is considered binding for the above purposes for the truthfulness of the content, only if accompanied by a specific stamp and
countersignature affixed at our headquarters and by personnel delegated to the above. Differences from the aforementioned original in content and/or
use will not imply any liability on the part of the Kristalcolor Sas company. The customer is required to verify that this sheet
AND ANY VALUES REPORTED are valid for the batch of product you are interested in and are not exceeded as they have been replaced by
Subsequent editions and/or new product formulations. If in doubt, please contact our Technical Office in advance.