REPEL 69 WET LOOK 1 LT

Repel 69 Wet Look
Water-repellent, impregnating and reviving agent.
For porous surfaces.
Anti-humidity, anti-saltpetre, anti-algae, anti-mould.
FEATURES
Repel 69 Wet Effect is a siloxane impregnating water repellent,
penetrating, consolidating and dust-proof for floors and coverings.
Protects against water, condensation, rising damp. Prevents
formation of mold, algae, moss, saltpetre and saline efflorescence.
Repel 69 Wet Effect gives a pleasant 'wet effect' and
persistently enhances the original colour and characteristics of the
stones. Prevents surface degradation due to frost cycles.
and thaw. It does not create a film, allowing the treated materials to breathe. Resistant
to chemicals and UV rays. It improves thermal insulation. Furthermore,
It has strong anti-graffiti properties.
APPLICATIONS
Suitable for porous substrates: unpolished natural and artificial stones,
marble, natural porcelain stoneware, travertine, concrete products
(marmette, gravel, concrete), bricks and small bricks for cladding
exteriors, terracotta, earthenware, clinker, porphyry, slate, beola, cardoso,
Lecce stone, carparo stone, pietra serena stone, peperino stone, mosaics, materials
stone, statues and decorative elements.
Excellent for protecting floor joints, when desired
also a reviving effect.
PROPERTIES AND ADVANTAGES
 Protects surfaces deeply for a long time;
 Protects against water, condensation, rising damp;
 It exhibits good oil-resistant properties;
 It has anti-dust properties;
 Allows treated materials to breathe;
 Prevents aging, the development of mold, moss, and
degradation due to freeze-thaw cycles;
 Anti-saltpetre and anti-algae;
 Protects surfaces from dirt;
 Resists chemicals and ultraviolet rays;
 Improves thermal insulation.
HOW TO USE
Preparation. The surfaces to be treated must be perfectly
clean and dry. For cleaning newly painted floors or coverings
construction, which present cement residues, washing is recommended
with the Dekrust 100 cleaner the Dopoposa. For lighter dirt and
where the acid cleaner is not compatible with the material, perform
cleaning with Boden strong detergent.
Application. Repel 69 Wet Effect is ready to use. Shake well.
Before use. Apply the product with a brush, roller, or sprayer.
and spread it carefully evenly until completely
absorption and until any unabsorbed product residue is eliminated
in the form of drops.
On less porous surfaces, remove any residues of the product.
completely absorbed by wiping with a cloth. Depending on the type of
absorption of the material, if necessary, can be repeated
apply a second time after 12-24 hours.
Indicative yield: 5-15 m2/lt. The yield varies according to the porosity of the
material to be treated.
PRECAUTIONS
Considering the heterogeneity of the materials, their
composition and their characteristics and, given the wide range of
surfaces that can be treated with this product, is
It is advisable to carry out preliminary tests on samples of the material
that you want to treat, in order to verify its toning effect,
the degree of absorption and the quantity of product to be used.
The product should be applied to fresh surfaces, not exposed to sunlight.
direct, at a temperature between 10° and 25°C. Close
hermetically seal containers after use.
VOC: maximum value of this product 710g/l.