-18% Sold out
EDILMACOTEK UNIGRIP LT 5(ANKOR K-70)
The original price was: €30.50.€25.00The current price is: €25.00. (Incl. VAT)
SHOWER ENCLOSURE 70x100 CRYSTAL 6mm TRANSP
The original price was: €506.30.€415.00The current price is: €415.00. (Incl. VAT)
EDILMACOTEK UNIGRIP LT14
The original price was: €75.64.€62.00The current price is: €62.00. (Incl. VAT)
100% secure shopping
Payments
protected
Insured shipping
Transportation
guaranteed
| Weight | 25 kg |
|---|---|
| Measure unit | PZ |
Sold Out
Description
EDILMACOTEK UNIGRIP ADHESION PROMOTER 14L
thin layer coatings should be removed; Lesions, solutions of
continuity and results from hygrometric shrinkage must be amended and
Let it mature. Regulate water-hungry substrates.
Product preparation:
It should be used as is. However, in order to improve it
the effectiveness, depending on the characteristics and behavior of the
support and personal manual ability, a dilution with is possible
5-7% water.
Effectiveness of adhesion:
Upon reaching the 'dry footprint' effect
Thickness:
Depending on the work being done: brush, roller.
Climate constraints of
From +5 °C to +35 °C.
application:
Maximum diameter:
0.5 mm quartz charge
Bulk density in pile
1,4 approx.
(kg/dm
3
):
Consumption:
300-400 g / m
2
Supply:
14L polyethylene drums
Storage:
Stored in a cool, dark place, 12 months
Moisture resistance:
Excellent
Resistance
Excellent
to aging:
Resistance to
Excellent
saponification:
Environmental resistance
Excellent
alkaline:
TIPS
At low temperatures, do not use cold water for occasional dilution. Strong
ventilation and intense solar radiation deviate the performance of the promoter generating
Undesirable results: poor adhesion to the substrate, inconsistencies. The time required for proper effectiveness
di
Ankor K-70
are a function of the dilution, the thicknesses applied, the climatic conditions and
construction sites, due to the hydrophilic behavior of the seabed. Do not continue with the work.
if the primer is in advanced dehydration. To ensure uniform distribution of the charge
mineral and binder, mix
Ankor K-70
when opening and repeat the action occasionally
during use. When fresh, tools can be washed with water. Once hardened, use solvents.
with synthetic resins. Highly hydrophilic supports must be corrected preliminarily with
water before applying
Ankor K-70
; an alternative is to dilute the primer with water beyond the
percentages indicated and, fresh on fresh, go over the intervention again with
Ankor K-70
as is.
WARNINGS
•
The applied product must be protected from frost, rapid drying and washing away.
•
Do not work on surfaces that are strongly irradiated, ventilated, frozen or thawing. Procrastinate.
the intervention with probable imminent frostbite
•
Walls affected by rain, condensation, rising damp and infiltration
they return aberrations.
•
Ankor K-70
It should not be used to make bonding bridges with binders
plumbers.
•
For particular substrates or those not prepared with suitable technical criteria, any
responsibility for the final result. It is therefore advisable to contact the manufacturer or the
company technical service.
•
The use of
Ankor K-70
must absolutely not disregard the observance of the precepts
of the implementation according to the rules of the art
•
For work on supports not included in the technical data sheet, contact the technical service
company.
•
The opened and set aside product that has started to film, film or modify the
viscous state, it must be disposed of.
•
The dilution ratios drawn up, when used, must be strictly respected.
•
Pay close attention to the primer's drying times. Incorrect drying times
dehydration affects the desired characteristic.
Technical advice relating to use provided verbally or in writing as assistance to the customer or applicator based on our
experiences, corresponding to the current state of scientific and practical knowledge, are not binding and do not demonstrate any
contractual legal relationship nor ancillary obligation with the sales contract. They do not exempt the buyer from his own
responsibility to personally test the products with regard to their suitability for the intended use. The contents of the
This form is considered binding for the above purposes for the truthfulness of the content, only if accompanied by a specific stamp and
countersignature affixed at our headquarters and by personnel delegated to the above. Differences from the aforementioned original in content and/or
use will not imply any liability on the part of the Kristalcolor Sas company. The customer is required to verify that this sheet
AND ANY VALUES REPORTED are valid for the batch of product you are interested in and are not exceeded as they have been replaced by
subsequent editions and/or new product formulations. If in doubt, please contact our Technical Office in advance.
Related items
-18% Sold out
KERAKOLL BIOCALCE PIETRA 25 KG
The original price was: €17.08.€14.01The current price is: €14.01. (Incl. VAT)
-18%
IVAS FINQUARZ SOLE P WHITE LT. 4
The original price was: €37.82.€31.00The current price is: €31.00. (Incl. VAT)
-18%
SARATOGA 50 DISPOSABLE THICKENED NITRILE GLOVES SIZE M
The original price was: €15.25.€12.51The current price is: €12.51. (Incl. VAT)
-18%
