MITAN ENAMEL GLOSS2 GLOSSY 0,75lt COLOR WALNUT BROWN 140

GLOSS2 GLOSSY Data Sheet Code 0126 Rev. 01 of 05.01.2016

Name GLOSS2 LUCIDO

Features: Professional solvent-based synthetic enamel. Glossy. Classification (UNI 8681) B4.AOBBAB

Single-component, oxidative chemical drying, glossy, alkyd finishing paint in solution with active pigmentation on the substrate.

VOC classification Paints for interior/exterior finishes and infills for wood, metal or plastic. (Directive 2004/42/EC) EU VOC limit value for GLOSS2 LUCIDO (Cat. A/d): 300 g/l (2010).

GLOSS2 LUCIDO contains a maximum of 300 g/l of VOCs.

Application cycle

NEW SUPPORT: Thoroughly clean the surface, removing all traces of dust, dirt, or loose particles, and degrease with washing thinner. On iron, apply a coat of MIT OXIDE synthetic rust inhibitor, or on wood, apply one or two coats of HERALITE sandable matte wood primer. Apply two coats of GLOSS2 LUCIDO.

PREVIOUSLY PAINTED SUBSTRATE: Thoroughly clean the surface, removing all traces of dust, dirt, or loose particles; fill and sand the treated areas to even out the surface, and degrease with a car wash thinner. On iron, apply a coat of MIT OXIDE synthetic rust inhibitor, or on wood, apply one or two coats of HERALITE sandable matte wood primer. Apply two coats of GLOSS2 LUCIDO.

Practical advice

ENVIRONMENTAL AND SUBSTRATE CONDITIONS Ambient temperature: min. +5°C / max. +30°C. Substrate temperature: min. +5°C / max. +30°C. Ambient relative humidity: < 60%. Substrate humidity: < 10% RH

Safety Precautions: Reclose the container immediately after use. Store the container tightly closed, away from heat sources, frost, and direct sunlight. Labeling is required (Legislative Decree No. 52 of February 3, 1997, and subsequent amendments and additions). User information is contained in the relevant safety data sheet. Empty containers or containers with slight traces of dried product residue must be disposed of in accordance with local regulations. GLOSS2 LUCIDO Data Sheet Code 0126 Rev. 01 of 05.01.2016 Page 2 of 2 Technical information Method Data at 20°C and 60% Relative Humidity Appearance and finish Glossy Density, g/ml UNI 8910 1,100 ÷ 1,250 Viscosity ISO Ǿ 4 , s UNI 8356 30 ÷ 40 Recommended dry film thickness ASTM D 1186 30 ÷ 45 microns per coat Solids content, % by weight UNI 8906 65 ÷ 80 Overpaintable, 18 – 24 hours Exterior / Interior YES/YES Colours Colour chart shades Binder Alkyd Tool cleaning Mineral spirits Thinner Mineral spirits Roller application, % by weight Ready to use Brush application, % by weight Ready to use

Spray and airless application, % by weight 10% Mineral spirits Contrast ratio MU 1631 99 – Good Theoretical coverage per coat, m2/lt ISO 7254 16-18 m2/lt per coat Gloss UNI 9389 95 – 99 – Shiny Dirt pick-up, ∆L UNI 10792 1,1 – Low The values expressed are averages of tests. The information indicated regarding the methods of use and the results obtainable with our product corresponds to our concrete experiences, but does not constitute our commitment or responsibility. Therefore, the sale of the product is not covered by guarantees regarding the application and is made with the understanding that the user will determine its suitability for his specific applications after having carried out preliminary tests.